answered: Rewrite the attached document, Tailoring Process_publishA an

  

Rewrite the attached document, Tailoring Process_publishA and use feedback to correct any mistakes:
Review the information in the presentation Tailoring Process Development (PPTX) and address the information presented on Slide 4.”
“Create a flow chart and process to visually represent the information provided in the presentation or, refer directly to MIL-HDBK-516C Section 1.2.1.”
The information on slide 4 of the presentation and in MIL-HDBK-516C Section 1.2.1. is as follows:
Tailoring rules for MIL-HDBK-516C are as follows:
a.Identify each criterion as applicable, partially applicable or non-applicable, considering system or product complexity,
type, data, and intended use. Document the rationale for identifying any criterion as non-applicable.
b.Fully applicable criteria may not be deleted or modified in any manner.
c.If a portion of a criterion partially applies, identify the applicable or non-applicable portion. Document the rationale for
identifying any criterion as partially applicable.
d.Supplement applicable or partially applicable criteria where appropriate for any capabilities or systems not fully
addressed by the criteria contained in this handbook.
e.Develop additional criteria, as appropriate. Document the rationale for any capabilities or systems not fully addressed by
the criteria contained in this handbook. Consider whether such criteria should be submitted for future inclusion in this
handbook.