Description I’m building a carbon separation system that is 2 phases phase 1 matrials: 1- 2 cylinders ( 1 filled with N2, and 1 with CO2 ) 2- pipes 3- Membrane 4- empty cylinder to fill with the filtered N2 Phase 2: 1- degassing system ( 3 water containers ) 2- pipes 3- empty cylinder System information: 1- Blender that sends a composition of gasses ( 20% co2, 80% N2 ) 2- pipes 3- Membrane ( information of the membrane attached ) 4- water containers ( 5L container filled with 1.37L of water ) 5- temperature is 20C 6- pressure used 55 psi I attached the picture of the system after we built it. + a diagram the information I need is: why we building this? what is the point of having a carbon separation method? what is the solubility of carbon dioxide? what is the concertation of carbon dioxide and N2 in the system ( we’re using a cylinder of CO2 and a cylinder of N2 but we also using a blender to have 20% co2 and 80% N2)? how did we calculate the water amount that we’re using in the system? and why we used 1.37L? what is the air recovery? and why you calculated it? what is the benefits of knowing it? what are the final results? how much CO2 captured and concetration? and how much N2 captured and concetration? and how to calculate that? what is the best method to verify the data?
Recent Comments