Please no copy from other work or internet. must be plagiarism free. Here is the Handout has the data and the Lab Manual for the lab Also A report Guid. please do all of the lab Questions, graphs, and Tables make it complete.
lab_handout.pdf
lab_manual.pdf
lab_report_guidelines_1_.docx
Unformatted Attachment Preview
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Scanned by CamScanner
Lab Report Guidelines
You should consider the last section of each lab experiment as well as 1.5 Report Preparation part when
writing a lab report.
The Materials and Methods and results section should be written in the past tense, since your
experiments are completed at the time you are writing your paper.
Your lab report should include the following sections:
Cover Page
•
Include the title of the experiment, name, group number, and the date on which the experiment
was performed
Introduction
•
•
Purpose of experiment
Background Information
Materials and Methods
•
•
•
Equipment Used
Schematic diagram of main equipment used (if required )
Test procedure generally contains information on the physical nature of the experiment, such as
the type of instrumentation used, the variables controlled and those that are not controlled, and
any unusual conditions. Here is an example of a section of that type.
The experiment was carried out with a Nicolet Fourier transform infrared (FTIR) spectrometer.
The resolution of the spectrometer was set at 1 cm-1 for all spectra. The experiment involved the
accumulation of a background spectrum which were subtracted from the spectrum of the sample
to provide the response of the sample. The detector was a nitrogen-cooled cadmium-telluride
detector. Each experiment resulted from the average 64 transient responses coadded, with the
background spectrum being the accumulation of 64 spectra without the sample present. The
data were analyzed by Fourier transformation using the software of the instrument. The data
were saved to disk, and were subsequently analyzed with a spreadsheet program, in this case,
Microsoft EXCEL. Theoretical values of the parameters were predicted by computation with the
program GAUSSIAN.
The section need not be long, but it should include everything about the experimental setup that
the author thinks is important.
retrieved from”https://www1.udel.edu/pchem/C446/example.pdf”
Results
•
•
•
•
Present your data using text AND figures/tables.
Describes your major findings in the data presented in the figures and tables.
Don’t interpret the data. It could be done in the Discussion section of the lab report.
All figures and tables are properly formatted with numbers, titles and legends that are easy to the
reader to follow.
•
DO NOT ATTACH YOUR LAB DATA SHEET to show your results.
Discussion
•
•
•
•
Summarize what you found.
Explain and interpret your results. It may involve comparison of the test results with existing
empirical relationship
Source of errors if any
Other details not included in the report
…
Purchase answer to see full
attachment
Recent Comments